Product Information
With the TruTool TSC 100, you can clean your slats quickly and effortlessly. This ensures reliable, high-quality production of laser-cut components. The slats do not need to be removed for cleaning. This is practical and saves you time. It takes approximately 30 minutes to clean an entire standard size pallet of 1500 mm x 3000 mm.
Cost reduction up to 75%
The TruTool TSC 100 is a purchase that pays off. It achieves savings of around 40% compared to manual cleaning, which involves a great deal of time and effort. With the ability to clean slats multiple times, it is possible to save up to 75% of costs compared with regular slat replacement.
Outstanding cleaning results
The TruTool TSC 100 adapts automatically to different slag thicknesses of up to 25 mm and achieves optimal cleaning results, even in the case of stubborn stainless steel slag. The sides of the slats themselves are cleaned, as well as the spaces in between the teeth. A further benefit is that you can insert the TruTool TSC 100 into any row of slats and clean these right up to the pallet edge while they are still installed.
Intelligent monitoring system
An intelligent monitoring system ensures safe and reliable work procedures. An integrated LED display uses a quick, continuous flash to notify you of when a seal needs to be replaced. Thanks to the new function monitoring system for the seal, it is no longer necessary to perform a manual check at regular intervals, which was previously required. The maintenance interval is automatically controlled through an electronic display. This saves you time and prevents possible damage to the tool, which could occur if the seals are not checked and replaced at the specified maintenance intervals.
Cleaning tool
Choose between tool no. 2 for slat thicknesses of 2 mm – 2.9 mm and tool no. 3 for 3 mm – 3.9 mm. The tools boast a long service life. Before being replaced, they are capable of cleaning an average of 10 standard pallets, which corresponds to 1000 metres.